Cell phone cradle/ holder with external antenna RF connector, Wilson 301146 works with all cell phone models for the best possible reception and transmission when no cable connection to the cell phone is possible.
Universal RF adapter: RF connection allows you cell phone to achieve far greater signal, reducing dropped calls!
All cell phone models: Use any cell phone up to 2.25 inches wide, and simply place the cell phone into the cradle/ holder. Squeeze the sides to cushion and hold the cell phone against the internal RF inductance unit. Push a button to release the cell phone.
Hands Free audio required: Since the cell phone must remain in the cradle to achieve better radio signal and reduce dropped calls, Audio must be achieved with an optional headset/ speaker phone. If you cell phone uses a cabled headset, be sure it attaches at the open bottom or top connector, as the side ports are often blocked by the cushioned cradle/ holder.
Wilson model 301146 operates at ALL cellular radio frequency bands of 806-960 MHz and 1700-2100 MHz. (Includes iDen/ Nextel radio frequencies plus ALL cellular bands)
Antenna connector: The FME female connector on the cradle mates directly to the FME Male connector on the optional Wilson 811214 amplifier.
ACC-5 RF adapter will allow this RF inductance cradle to connect into the Magnetic mount antenna ASPRDM1994TM antenna for a passive antenna application.
ACC-9 RF adapter will allow this RF inductance cradle to connect into the Magnetic mount antenna 301113 antenna for a passive antenna application.
Mounting options: Air vent, adhesive, and screw swivel mounting brackets included. Suction cup mount is NOT included.